Common Faults and Solutions of Animatronic Dinosaurs

Author: KANOSAUR | Publish time: 2018-09-19 | Views | Share:

The controller indicator lights up after the animatronic dinosaur plugged in the power supply, but the animatronic dinosaur did not respond and could not work properly. Usually you need to contact our after-sales service staff, but if you need to use it urgently, and your hands-on ability is strong, you can press the method to troubleshoot in advance.The controller indicator lights up after the animatronic dinosaur plugged in the power supply, but the animatronic dinosaur did not respond and could not work properly. Usually you need to contact our after-sales service staff, but if you need to use it urgently, and your hands-on ability is strong, you can press the method to troubleshoot in advance.

Problem: After the animatronic dinosaur was energized, there was no reaction.

Solution: Check whether the controller indicator light is on, if the indicator light is on and the arm is swinging in front of the induction probe, the machine is still not responding. It may be that the induction probe is damaged. At this time, the induction probe can be interchanged with the fault-free machine to determine, after confirming the fault, take out the new induction probe from the repair kit or email us for sending the induction probe to you.

Problem: The animatronic dinosaurs have movements, but the movements were not complete (for example, only the mouth does not respond).

Solution: the machine has action, but only one action is invalid, at this time the corresponding fuse is broken, you need to use a screwdriver to turn on the black controller, visual inspection of the circuit board whether there is a fuse burning phenomenon (the fuse is for the transparent cover of the car, you can see through the eyes whether the wire is broken), if it is, remove the fuse of the corresponding color from the repair kit, but if the fuse is still damaged after the replacement, you need to contact us immediately.

Problem: Animatronic dinosaur mouth opened, but there was no roar.

Solution: When dinosaurs open their mouths, there is no sound in the loudspeaker; if the mouth is open, first observe whether the power indicator on the speaker is on, if it is on, it may be the SD card plugged in the speaker is not in good contact or damage; if the speaker indicator is not on, it may be the external speaker is damaged. If you have the conditions to replace it, please contact us directly. If it is built-in horn, it may be horn damage or controller internal failure, please contact us directly.

Problem: Animatronic dinosaur does one movement with an abnormal sound.

Solution: If the tail swings to one side, the motor part emits an abnormal sound, this situation may be due to external force caused by friction after deformation, you need to contact us, by our technical personnel to help you correct the restoration of mechanical structure. If the tail is abnormally sounded all the time, there may be a stuck fault in the motor reducer or bearing. In this case, the faulty motor reducer or bearing needs to be replaced. Please contact us by mail.

Problem: The skin was damaged by sharp tools and cracks.

Solution: Animatronic dinosaur skin is made up of silicone gel and fiber cloth. If the skin is cut by a sharp tool, it is easy to crack. You can use a needle and thread to sew up the crack (as neatly as possible), and then take out transparent glass glue from the repair kit to make the crack even. With a layer of glass glue, it can be easily repaired after waiting for air drying.